Sensor

Pressure sensor SMD differential pressure, -1~1kPa, I2C/3.3V

Micro-power Hall switch sensor, single N pole, 1.8V, 30GS

Type: Unipolar Switch Supply Voltage (V): 3.5~60 Power Consumption (mA): 7 ESD(KV): 6 Operating Temperature (℃): -40~150 Operating Point (Gs): 85 Release Point (Gs): 60 Output form: two-wire current type

High-performance Hall latch, 8kV ESD, +/-15G, built-in pull-up resistor

The ADM1032 is a dual-channel digital thermometer and under/over temperature alarm for PCs and thermal management systems. The device measures the temperature of a remote thermal diode, either mounted on the processor die or as a discrete device (2N3904/06), with 1°C accuracy. A new measurement technique eliminates the absolute value of the transistor's base-emitter voltage, so no calibration is required. The ADM1032 also measures its ambient temperature.

The ADT7476A is a thermal supervisor and multiple PWM fan controller for noise-sensitive or power-sensitive applications requiring active system cooling. The ADT7476A can drive a fan using a low or high frequency drive signal and monitor the temperature of up to two remote sensor diodes as well as its own internal temperature. The device can also measure and control the speed of up to four fans so that they run at the lowest speed possible for the lowest noise.

Hall sensor chip

1.8V, 10uA Analog Output Temperature Sensor in SC70 and TO-92 Packages 3-TO-92 -50 to 150

Single bead switch, main body 8.0x5.2, each length of AB pin is 18.5mm gold-plated

Built-in LDO, 1 channel touch input and 1 channel touch output, can respond to double-click application requirements in sleep state, synchronous NMOS output, maximum turn-on time 16S