Logic device/transceiver/encoder

Octal Bus Transceiver with 3-State Outputs

The high-performance silicon-gate CMOS MC74HC574A has the same pin-out as the LS574. The device inputs are compatible with standard CMOS outputs; pull-up resistors are included for compatibility with LSTTL outputs. Data that meets the setup time requirements is clocked to the output with the rising edge of the clock. The output-enable input does not affect the state of the flip-flops, but all device outputs are forced to a high-impedance state when output-enable is high. Therefore, data can be stored even if the output is not enabled. The HC574A has the same functionality as the HCT374A, but has a trigger input on the opposite side of the encapsulation output, simplifying PC motherboard layout.

SN74LVTH162244 3.3-V ABT 16-bit buffer/driver with 3-state outputs

SN74LS14 Six Schmitt Trigger Inverter

CD4027B CMOS Dual J-K Master/Slave Flip-Flop

The MC74VHC1GT08 is an advanced high speed CMOS 2-input AND gate fabricated on a silicon gate CMOS process. It achieves high-speed operation similar to an equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. This internal circuit consists of three stages, including a buffered output that provides high noise immunity and stable output. The device input is compatible with TTL-type input thresholds, and the output has a full CMOS level output swing. Input protection circuitry on the device allows overvoltage tolerance on the inputs, enabling the device to be used as a logic level translator from 3.0 V CMOS logic to 5.0 V CMOS logic, or 1.8 V CMOS logic to 3.0 V CMOS logic, and Capable of running on high voltage power supplies. The MC74VHC1GT08 input structure provides protection when voltages up to 5.5 V are applied regardless of the supply voltage. This allows the MC74VHC1GT08 to be used as an interface to 5 V to 3 V circuits. The output structure also provides protection when VCC = 0V. These input and output structures help prevent device damage due to supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc.

Single 0.8V to 3.6V Low Power Buffer with Open-Drain Output 6-SON -40 to 85

SN74LS165A Serial Output Shift Register