Vishay Semiconductor Diodes Division
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
TZMC2V4-GS18
تفصیل دیکھیں ڈیٹا شیٹ

TZMC2V4-GS18

Introduction

The TZMC2V4-GS18 is a component belonging to the category of Zener diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low impedance, and high reliability
  • Package: SOD-123
  • Essence: Semiconductor material with specific doping to achieve desired voltage characteristics
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Voltage: 2.4V
  • Power Dissipation: 1W
  • Operating Temperature Range: -65°C to +150°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The TZMC2V4-GS18 Zener diode has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Precise Voltage Regulation: Maintains a constant voltage across the diode under varying load conditions.
  • Overvoltage Protection: Safeguards sensitive components in the circuit by diverting excess voltage.
  • Low Impedance: Allows for efficient current flow while regulating voltage.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact package size
  • Low impedance for efficient operation

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from excessive current or voltage spikes

Working Principles

The TZMC2V4-GS18 operates based on the principle of the Zener effect, where it maintains a nearly constant voltage drop across its terminals when reverse-biased at its specified voltage.

Detailed Application Field Plans

The TZMC2V4-GS18 finds applications in various electronic circuits, including: - Voltage regulators in power supplies - Overvoltage protection in communication equipment - Signal clamping in audio and video circuits

Detailed and Complete Alternative Models

Some alternative models to the TZMC2V4-GS18 include: - BZX84C2V4LT1G - MMBZ5242BLT1G - PZM2.4NB2A

In conclusion, the TZMC2V4-GS18 Zener diode offers precise voltage regulation and overvoltage protection in a compact package, making it suitable for a wide range of electronic applications.

[Word Count: 345]

تکنیکی حل میں TZMC2V4-GS18 کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is the maximum voltage rating for TZMC2V4-GS18?

    • The maximum voltage rating for TZMC2V4-GS18 is 30 volts.

  2. What is the power dissipation of TZMC2V4-GS18?

    • The power dissipation of TZMC2V4-GS18 is 500 mW.

  3. What is the forward voltage drop of TZMC2V4-GS18 at a specified current?

    • At a specified current of 10 mA, the forward voltage drop of TZMC2V4-GS18 is typically 0.9 volts.

  4. Can TZMC2V4-GS18 be used in reverse bias?

    • Yes, TZMC2V4-GS18 can be used in reverse bias as a Zener diode.

  5. What is the temperature coefficient of TZMC2V4-GS18?

    • The temperature coefficient of TZMC2V4-GS18 is approximately 6.5 mV/°C.

  6. Is TZMC2V4-GS18 RoHS compliant?

    • Yes, TZMC2V4-GS18 is RoHS compliant, meeting environmental standards.

  7. What are the typical applications of TZMC2V4-GS18?

    • Typical applications of TZMC2V4-GS18 include voltage regulation, overvoltage protection, and signal clamping.

  8. What is the maximum reverse leakage current for TZMC2V4-GS18?

    • The maximum reverse leakage current for TZMC2V4-GS18 is 0.5 µA at the specified voltage.

  9. Does TZMC2V4-GS18 require a heat sink for certain applications?

    • For most applications, TZMC2V4-GS18 does not require a heat sink due to its low power dissipation.

  10. What is the package type of TZMC2V4-GS18?

    • TZMC2V4-GS18 is available in a SOD-123 package for easy mounting and integration into circuit designs.