Vishay Semiconductor Diodes Division
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
SMAJ10C-E3/61
تفصیل دیکھیں ڈیٹا شیٹ

SMAJ10C-E3/61

Product Overview

Category

The SMAJ10C-E3/61 belongs to the category of semiconductor devices, specifically a type of diode.

Use

This product is commonly used for voltage regulation and transient voltage suppression in electronic circuits.

Characteristics

  • Fast response time
  • Low leakage current
  • High surge capability
  • Compact package size

Package

The SMAJ10C-E3/61 is typically available in a surface-mount DO-214AC (SMA) package.

Essence

The essence of this product lies in its ability to protect sensitive electronic components from voltage spikes and transients.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities, depending on the manufacturer's specifications.

Specifications

  • Part Number: SMAJ10C-E3/61
  • Type: Unidirectional
  • Voltage Rating: 10V
  • Peak Pulse Power: 400W
  • Operating Temperature Range: -55°C to +150°C
  • Mounting Type: Surface Mount
  • Package/Case: DO-214AC (SMA)

Detailed Pin Configuration

The SMAJ10C-E3/61 has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Transient voltage suppression
  • Reverse polarity protection
  • Overvoltage protection

Advantages and Disadvantages

Advantages

  • Fast response to transient events
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Unidirectional protection only

Working Principles

The SMAJ10C-E3/61 operates based on the principle of avalanche breakdown, where it rapidly clamps the voltage during transient events, diverting excess energy away from sensitive components.

Detailed Application Field Plans

This diode is commonly used in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the SMAJ10C-E3/61 include: - P6KE10CA - 1.5KE10A - SMBJ10A

In conclusion, the SMAJ10C-E3/61 diode serves as a crucial component in protecting electronic circuits from voltage transients and surges, finding widespread use across different industries due to its compact size and reliable performance.

[Word count: 349]

تکنیکی حل میں SMAJ10C-E3/61 کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is the maximum peak pulse power of SMAJ10C-E3/61?

    • The maximum peak pulse power is 400 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of SMAJ10C-E3/61?

    • The breakdown voltage is typically 11.1 volts at 1mA.

  3. What is the operating temperature range for SMAJ10C-E3/61?

    • The operating temperature range is -55°C to +150°C.

  4. What is the reverse stand-off voltage of SMAJ10C-E3/61?

    • The reverse stand-off voltage is 9.4 volts.

  5. What is the clamping voltage of SMAJ10C-E3/61?

    • The clamping voltage is 15.6 volts at 10A.

  6. What is the peak pulse current of SMAJ10C-E3/61?

    • The peak pulse current is 43.5A for an 8/20μs waveform.

  7. What are the typical applications for SMAJ10C-E3/61?

    • Typical applications include protection of sensitive electronic equipment from voltage transients induced by lightning, inductive load switching, and electrostatic discharge (ESD).

  8. What is the package type of SMAJ10C-E3/61?

    • The package type is DO-214AC (SMA).

  9. Does SMAJ10C-E3/61 comply with RoHS requirements?

    • Yes, it is compliant with RoHS requirements.

  10. Is SMAJ10C-E3/61 suitable for use in automotive electronics?

    • Yes, it is suitable for use in automotive electronics, providing protection against transient voltage events.