Torex Semiconductor Ltd
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6108C26AGR-G
تفصیل دیکھیں ڈیٹا شیٹ

XC6108C26AGR-G

Product Overview

Category

XC6108C26AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108C26AGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C26AGR-G lies in its ability to provide stable voltage output for various electronic applications.

Packaging/Quantity

XC6108C26AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.6V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C26AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C26AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited output current capacity (100mA).
  • Dropout voltage of 200mV may not be suitable for applications with strict voltage requirements.

Working Principles

XC6108C26AGR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring and adjusting, it compensates for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6108C26AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C26AGR-G are: - LM1117-2.6 - MCP1700-2.6 - TPS73626

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific design requirements.

Word count: 386 words

تکنیکی حل میں XC6108C26AGR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6108C26AGR-G in technical solutions:

  1. Q: What is XC6108C26AGR-G? A: XC6108C26AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C26AGR-G? A: The operating voltage range of XC6108C26AGR-G is typically between 0.9V and 6.0V.

  3. Q: What is the purpose of using XC6108C26AGR-G in a technical solution? A: XC6108C26AGR-G is commonly used to ensure proper system operation by monitoring the power supply voltage and initiating a reset if it falls below a specified level.

  4. Q: Can XC6108C26AGR-G be used in battery-powered applications? A: Yes, XC6108C26AGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: How does XC6108C26AGR-G provide a reset signal? A: XC6108C26AGR-G provides an active-low reset signal that goes low when the monitored voltage drops below the threshold, and remains low until the voltage rises above the threshold again.

  6. Q: What is the typical reset threshold voltage of XC6108C26AGR-G? A: The typical reset threshold voltage of XC6108C26AGR-G is 2.6V.

  7. Q: Is XC6108C26AGR-G capable of generating a delay before providing the reset signal? A: No, XC6108C26AGR-G does not have an integrated delay function. If a delay is required, an external timer or delay circuit can be used in conjunction with XC6108C26AGR-G.

  8. Q: Can XC6108C26AGR-G be used in automotive applications? A: Yes, XC6108C26AGR-G is suitable for automotive applications as it meets the necessary automotive standards and has a wide operating temperature range.

  9. Q: What is the package type of XC6108C26AGR-G? A: XC6108C26AGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Q: Are there any specific precautions to consider when using XC6108C26AGR-G? A: It is important to ensure proper decoupling and filtering of the power supply to minimize noise and voltage fluctuations. Additionally, the datasheet should be consulted for detailed application guidelines and recommended PCB layout considerations.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C26AGR-G.