تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
XC6108C22AGR-G

XC6108C22AGR-G

Product Overview

Category

XC6108C22AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108C22AGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C22AGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108C22AGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.2V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C22AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C22AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive heat, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output, ensuring reliable performance of connected devices.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage of 200mV may result in a slight voltage drop across the regulator.

Working Principles

XC6108C22AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108C22AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C22AGR-G are: - LM1117-2.2 - MCP1702-2.2 - AP2112-2.2 - TS2950CT-2.2

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 346 words

تکنیکی حل میں XC6108C22AGR-G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of XC6108C22AGR-G in technical solutions:

  1. Q: What is XC6108C22AGR-G? A: XC6108C22AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C22AGR-G? A: The operating voltage range of XC6108C22AGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C22AGR-G help in technical solutions? A: XC6108C22AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: Can XC6108C22AGR-G be used in battery-powered applications? A: Yes, XC6108C22AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6108C22AGR-G? A: The typical reset threshold voltage of XC6108C22AGR-G is 2.2V.

  6. Q: Does XC6108C22AGR-G have an adjustable reset threshold voltage? A: No, XC6108C22AGR-G has a fixed reset threshold voltage and does not offer adjustment options.

  7. Q: Is XC6108C22AGR-G suitable for use in automotive applications? A: Yes, XC6108C22AGR-G is suitable for use in automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108C22AGR-G be used in industrial control systems? A: Yes, XC6108C22AGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

  9. Q: Does XC6108C22AGR-G have any built-in delay for the reset signal? A: Yes, XC6108C22AGR-G has a built-in fixed delay time of typically 200ms to ensure stable operation during power-up or voltage fluctuations.

  10. Q: What package does XC6108C22AGR-G come in? A: XC6108C22AGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C22AGR-G.