STMicroelectronics
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
UC3845BD1013TR
تفصیل دیکھیں ڈیٹا شیٹ

UC3845BD1013TR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: PWM Controller
  • Characteristics: High-performance, current-mode control, adjustable frequency, and duty cycle
  • Package: SOIC-8
  • Essence: Regulates the output voltage of power supplies
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 7V to 30V
  • Output Voltage Range: 5V to 30V
  • Maximum Duty Cycle: 100%
  • Oscillator Frequency Range: 50kHz to 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VREF: Reference voltage input
  2. COMP: Error amplifier output
  3. FB: Feedback voltage input
  4. RT/CT: Timing resistor/capacitor connection
  5. CT: Timing capacitor connection
  6. GND: Ground
  7. OUT: Output
  8. VCC: Power supply input

Functional Features

  • Current-mode control for improved stability and transient response
  • Adjustable frequency and duty cycle for flexible power supply design
  • Error amplifier with high gain for accurate voltage regulation
  • Soft-start function to prevent excessive inrush current
  • Overcurrent protection to safeguard the circuitry

Advantages

  • High-performance PWM controller suitable for various power supply applications
  • Wide input and output voltage range for versatility
  • Robust design ensures reliable operation in harsh environments
  • Compact SOIC-8 package for space-constrained designs
  • Cost-effective solution for power supply regulation

Disadvantages

  • Limited maximum duty cycle may restrict certain applications
  • Requires external components for complete power supply implementation
  • Not suitable for high-power applications due to its small package size

Working Principles

The UC3845BD1013TR is a current-mode PWM controller that regulates the output voltage of power supplies. It operates by comparing the feedback voltage (FB) with a reference voltage (VREF) to generate an error signal. This error signal is then amplified and used to control the duty cycle of the output waveform. By adjusting the timing resistor (RT) and timing capacitor (CT), the frequency and duty cycle can be set according to the desired power supply specifications.

Detailed Application Field Plans

The UC3845BD1013TR is widely used in various applications, including: 1. Switching Power Supplies: Provides voltage regulation in AC-DC and DC-DC converters. 2. LED Lighting: Controls the brightness of LEDs in lighting systems. 3. Motor Control: Regulates the speed and torque of motors in industrial and automotive applications. 4. Battery Chargers: Manages the charging process for batteries in portable devices and electric vehicles. 5. Audio Amplifiers: Ensures stable power supply for audio amplification circuits.

Detailed and Complete Alternative Models

  1. UC3842: Similar functionality but with a different pin configuration (DIP-8 package).
  2. UC3843: Higher frequency range and additional features like synchronization input (SOIC-8 package).
  3. UC3844: Enhanced version with built-in overvoltage protection and adjustable soft-start (SOIC-14 package).
  4. UC3846: Dual-output version with independent control for two power supplies (SOIC-16 package).

(Note: These alternative models are just a few examples; there are several other alternatives available in the market.)

This encyclopedia entry provides an overview of the UC3845BD1013TR PWM controller, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

تکنیکی حل میں UC3845BD1013TR کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of UC3845BD1013TR in technical solutions:

  1. Q: What is UC3845BD1013TR? A: UC3845BD1013TR is a pulse width modulation (PWM) controller IC commonly used in power supply applications.

  2. Q: What is the purpose of UC3845BD1013TR in a technical solution? A: UC3845BD1013TR is used to regulate the output voltage of a power supply by controlling the duty cycle of the PWM signal.

  3. Q: How does UC3845BD1013TR work? A: UC3845BD1013TR compares the feedback voltage from the power supply with a reference voltage, and adjusts the duty cycle of the PWM signal accordingly to maintain a stable output voltage.

  4. Q: What is the maximum input voltage that UC3845BD1013TR can handle? A: UC3845BD1013TR can typically handle input voltages up to 30V.

  5. Q: Can UC3845BD1013TR be used for both step-up and step-down voltage regulation? A: Yes, UC3845BD1013TR can be used for both step-up (boost) and step-down (buck) voltage regulation.

  6. Q: What is the maximum switching frequency of UC3845BD1013TR? A: The maximum switching frequency of UC3845BD1013TR is typically around 500kHz.

  7. Q: Is UC3845BD1013TR suitable for high-power applications? A: UC3845BD1013TR is commonly used in low to medium power applications. For high-power applications, it may be necessary to use multiple ICs or a different controller.

  8. Q: Can UC3845BD1013TR operate in a wide temperature range? A: Yes, UC3845BD1013TR is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  9. Q: What are the typical protection features of UC3845BD1013TR? A: UC3845BD1013TR usually includes features like overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  10. Q: Are there any application notes or reference designs available for UC3845BD1013TR? A: Yes, the manufacturer of UC3845BD1013TR often provides application notes and reference designs that can help with the implementation of the IC in various technical solutions.