STMicroelectronics
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
STD6N90K5
تفصیل دیکھیں ڈیٹا شیٹ

STD6N90K5

Product Overview

  • Category: Power MOSFET
  • Use: Switching and amplification in power electronics applications
  • Characteristics: High voltage, low on-resistance, fast switching speed
  • Package: TO-252-3 (DPAK)
  • Essence: Efficient power management
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 900V
  • Current Rating: 6A
  • On-Resistance: 1.8Ω
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • Fast switching speed for improved efficiency
  • Low on-resistance for reduced power loss
  • High voltage rating for versatile applications
  • Enhanced thermal performance for reliability

Advantages and Disadvantages

Advantages

  • High voltage rating allows for diverse application scenarios
  • Low on-resistance minimizes power dissipation
  • Fast switching speed enhances efficiency

Disadvantages

  • Sensitive to static electricity and voltage spikes
  • Requires careful handling during assembly and operation

Working Principles

The STD6N90K5 operates based on the principles of field-effect transistors, utilizing the gate voltage to control the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the device switches on, allowing current to flow through.

Detailed Application Field Plans

The STD6N90K5 is suitable for various power electronics applications, including: - Switch-mode power supplies - Motor control - LED lighting - Solar inverters - Audio amplifiers

Detailed and Complete Alternative Models

  • STP6NK90ZFP
  • IRFP4568PBF
  • FDPF7N50NZ

Note: The above list is not exhaustive and serves as a starting point for alternative models.

This comprehensive entry provides an in-depth understanding of the STD6N90K5 Power MOSFET, covering its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

تکنیکی حل میں STD6N90K5 کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is the maximum drain-source voltage of STD6N90K5?

    • The maximum drain-source voltage of STD6N90K5 is 900V.

  2. What is the continuous drain current rating of STD6N90K5?

    • The continuous drain current rating of STD6N90K5 is 6A.

  3. What is the on-state resistance (RDS(on)) of STD6N90K5?

    • The on-state resistance (RDS(on)) of STD6N90K5 is typically 1.15 ohms.

  4. What is the gate-source threshold voltage of STD6N90K5?

    • The gate-source threshold voltage of STD6N90K5 is typically 2-4V.

  5. What are the typical applications for STD6N90K5?

    • STD6N90K5 is commonly used in power supplies, motor control, and lighting applications.

  6. What is the maximum junction temperature of STD6N90K5?

    • The maximum junction temperature of STD6N90K5 is 150°C.

  7. Is STD6N90K5 suitable for high-frequency switching applications?

    • Yes, STD6N90K5 is suitable for high-frequency switching due to its fast switching characteristics.

  8. Does STD6N90K5 require a heat sink for certain applications?

    • Depending on the application and power dissipation, a heat sink may be required for STD6N90K5.

  9. What are the recommended operating conditions for STD6N90K5?

    • The recommended operating temperature range for STD6N90K5 is -55°C to 150°C.

  10. Can STD6N90K5 be used in automotive applications?

    • Yes, STD6N90K5 can be used in automotive applications, provided it meets the specific requirements and standards for automotive electronics.