ON Semiconductor
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
NCP1587ADR2G
تفصیل دیکھیں ڈیٹا شیٹ

NCP1587ADR2G

Product Overview

Category

NCP1587ADR2G belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate voltage levels and ensure stable power supply.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

NCP1587ADR2G is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of NCP1587ADR2G lies in its ability to provide reliable and efficient voltage regulation for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of NCP1587ADR2G units.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: Up to 3A
  • Dropout Voltage: 1.3V (typical)
  • Quiescent Current: 10mA (typical)
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for adjusting output voltage
  4. VOUT: Output voltage pin
  5. ADJ: Adjust pin for fine-tuning output voltage
  6. EN: Enable pin for turning the regulator on/off
  7. NC: No connection pin
  8. NC: No connection pin

Functional Features

  • High Efficiency: The NCP1587ADR2G offers high efficiency, minimizing power losses during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain stable output voltage even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The wide input voltage range allows for flexibility in various applications.
  • Adjustable Output Voltage: The output voltage can be easily adjusted using the feedback pin, providing versatility for different requirements.
  • Overcurrent Protection: The NCP1587ADR2G incorporates overcurrent protection to safeguard against excessive current flow.
  • Thermal Shutdown Protection: In case of overheating, the regulator automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power losses.
  • Wide input voltage range accommodates diverse applications.
  • Adjustable output voltage offers flexibility.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited output current capacity (up to 3A).
  • Requires external components for proper operation.

Working Principles

The NCP1587ADR2G operates as a linear voltage regulator. It regulates the output voltage by comparing it with a reference voltage and adjusting the pass transistor accordingly. The feedback pin allows for precise adjustment of the output voltage. When the input voltage exceeds the desired output voltage, the regulator reduces the voltage across the pass transistor, maintaining a stable output voltage.

Detailed Application Field Plans

NCP1587ADR2G finds application in various electronic systems, including: 1. Power supplies for industrial equipment 2. Automotive electronics 3. Telecommunications devices 4. Consumer electronics 5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to NCP1587ADR2G include: 1. LM317: A popular adjustable linear voltage regulator. 2. LT1083: A high-current linear voltage regulator. 3. LM1117: A low dropout voltage regulator. 4. TPS7A47: An ultra-low noise linear voltage regulator.

These alternative models provide options for different voltage and current requirements, enabling designers to choose the most suitable regulator for their specific applications.

Word count: 523 words

تکنیکی حل میں NCP1587ADR2G کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of NCP1587ADR2G in technical solutions:

  1. Q: What is NCP1587ADR2G? A: NCP1587ADR2G is a voltage regulator IC (integrated circuit) that provides a regulated output voltage for various electronic applications.

  2. Q: What is the input voltage range of NCP1587ADR2G? A: The input voltage range of NCP1587ADR2G is typically between 4.5V and 40V.

  3. Q: What is the output voltage range of NCP1587ADR2G? A: The output voltage range of NCP1587ADR2G can be adjusted from 1.25V to 37V using external resistors.

  4. Q: What is the maximum output current of NCP1587ADR2G? A: The maximum output current of NCP1587ADR2G is 3A, but it may vary depending on the operating conditions and thermal considerations.

  5. Q: Is NCP1587ADR2G suitable for battery-powered applications? A: Yes, NCP1587ADR2G is suitable for battery-powered applications as it has low quiescent current and supports low dropout voltage operation.

  6. Q: Does NCP1587ADR2G have built-in protection features? A: Yes, NCP1587ADR2G includes built-in protection features such as thermal shutdown, current limiting, and short-circuit protection.

  7. Q: Can NCP1587ADR2G operate in a wide temperature range? A: Yes, NCP1587ADR2G can operate in a wide temperature range, typically from -40°C to +125°C.

  8. Q: What type of package does NCP1587ADR2G come in? A: NCP1587ADR2G is available in a small outline package (SOIC-8) which is suitable for surface mount applications.

  9. Q: Can NCP1587ADR2G be used in automotive applications? A: Yes, NCP1587ADR2G is designed to meet the requirements of automotive applications and is qualified to AEC-Q100 standards.

  10. Q: Are there any application notes or reference designs available for NCP1587ADR2G? A: Yes, ON Semiconductor provides application notes and reference designs that can help with the implementation of NCP1587ADR2G in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.