NXP USA Inc.
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
LS1084AXE7PTA

LS1084AXE7PTA

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: AXE7PTA
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Output Current: Up to 1A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The LS1084AXE7PTA has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage

Functional Features

  • High Efficiency: The LS1084AXE7PTA offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 75µA, it ensures minimal power consumption during standby or low-load conditions.
  • Wide Input Voltage Range: It can accept input voltages ranging from 2.5V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility for different system requirements.
  • Overcurrent Protection: The device incorporates overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Wide input voltage range - Adjustable output voltage - Overcurrent protection

Disadvantages: - Limited output current capacity (up to 1A)

Working Principles

The LS1084AXE7PTA is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a control loop to maintain the desired output voltage by adjusting the duty cycle of an internal switch. This switching action allows for efficient power conversion while minimizing energy loss.

Detailed Application Field Plans

The LS1084AXE7PTA can be used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

  • LS1083AXE7PTA: Similar specifications with a lower output current capacity of 500mA.
  • LS1085AXE7PTA: Similar specifications with a higher output current capacity of 1.5A.
  • LS1086AXE7PTA: Similar specifications with a higher output current capacity of 2A.

Note: These alternative models provide options based on different output current requirements.

Word count: 305 words

تکنیکی حل میں LS1084AXE7PTA کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of LS1084AXE7PTA in technical solutions:

  1. Q: What is LS1084AXE7PTA? A: LS1084AXE7PTA is a specific model of integrated circuit (IC) that is commonly used in technical solutions.

  2. Q: What is the purpose of LS1084AXE7PTA? A: The purpose of LS1084AXE7PTA is to regulate voltage in electronic circuits, ensuring a stable power supply.

  3. Q: What are the key features of LS1084AXE7PTA? A: Some key features of LS1084AXE7PTA include high accuracy, low dropout voltage, and thermal shutdown protection.

  4. Q: What is the input voltage range for LS1084AXE7PTA? A: The input voltage range for LS1084AXE7PTA typically ranges from 4.5V to 20V.

  5. Q: What is the output voltage range for LS1084AXE7PTA? A: The output voltage range for LS1084AXE7PTA can be adjusted from 1.25V to 13.8V.

  6. Q: How much current can LS1084AXE7PTA handle? A: LS1084AXE7PTA can handle a maximum output current of up to 5A.

  7. Q: Can LS1084AXE7PTA be used in automotive applications? A: Yes, LS1084AXE7PTA is suitable for automotive applications as it meets the necessary requirements and standards.

  8. Q: Does LS1084AXE7PTA require any external components for operation? A: Yes, LS1084AXE7PTA requires external capacitors and resistors for proper operation.

  9. Q: Is LS1084AXE7PTA available in different package options? A: Yes, LS1084AXE7PTA is available in various package options, such as TO-220 and TO-263.

  10. Q: Where can I find more information about the application of LS1084AXE7PTA? A: You can refer to the datasheet or technical documentation provided by the manufacturer for detailed information on the application of LS1084AXE7PTA.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to consult the datasheet and relevant technical resources for accurate information.