Microsemi Corporation
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
MXPLAD15KP51AE3
تفصیل دیکھیں ڈیٹا شیٹ

MXPLAD15KP51AE3 Product Overview

Introduction

The MXPLAD15KP51AE3 belongs to the category of transient voltage suppressor (TVS) diodes, which are widely used for protecting sensitive electronic components from voltage spikes and transients. These diodes exhibit characteristics such as high surge capability, low clamping voltage, and fast response time. The package type, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models are discussed below.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics:
    • High surge capability
    • Low clamping voltage
    • Fast response time
  • Package: SMD/SMT
  • Essence: Silicon
  • Packaging/Quantity: Tape & Reel (TR)

Specifications

  • Voltage - Reverse Standoff (Typ): 15V
  • Voltage - Breakdown (Min): 16.7V
  • Voltage - Clamping (Max) @ Ipp: 24.4V
  • Current - Peak Pulse (10/1000µs): 50A
  • Power - Peak Pulse: 1500W
  • Type: Zener

Detailed Pin Configuration

The MXPLAD15KP51AE3 TVS diode typically consists of three pins: 1. Anode 2. Cathode 3. Ground

Functional Features

  • Transient Voltage Suppression: Protects sensitive electronic components from voltage spikes.
  • Fast Response Time: Quickly responds to transient events, minimizing potential damage.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • High surge capability
  • Low clamping voltage

Disadvantages

  • Limited to specific voltage and current ratings
  • May require additional circuitry for comprehensive protection

Working Principles

The MXPLAD15KP51AE3 operates based on the principle of Zener breakdown, where it conducts when the voltage across it exceeds the breakdown voltage. This effectively shunts excess current away from sensitive components, protecting them from damage.

Detailed Application Field Plans

The MXPLAD15KP51AE3 is commonly used in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to MXPLAD15KP51AE3 include: - SMAJ15A - P6KE15CA - 1.5KE15A

In conclusion, the MXPLAD15KP51AE3 transient voltage suppressor diode offers effective protection against voltage spikes and transients, making it a crucial component in various electronic systems.

Word count: 366

تکنیکی حل میں MXPLAD15KP51AE3 کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is MXPLAD15KP51AE3?

    • MXPLAD15KP51AE3 is a high-power transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What are the key features of MXPLAD15KP51AE3?

    • The key features include a peak pulse power of 15000W, low clamping voltage, fast response time, and high surge current capability.

  3. In what technical solutions can MXPLAD15KP51AE3 be used?

    • MXPLAD15KP51AE3 can be used in various technical solutions such as power supplies, industrial equipment, automotive electronics, telecommunications systems, and more.

  4. How does MXPLAD15KP51AE3 protect electronic devices?

    • MXPLAD15KP51AE3 protects electronic devices by diverting excessive current away from sensitive components during voltage surges or transients, thus preventing damage.

  5. What is the operating temperature range of MXPLAD15KP51AE3?

    • MXPLAD15KP51AE3 typically operates within a temperature range of -55°C to +175°C, making it suitable for a wide range of environments.

  6. Is MXPLAD15KP51AE3 RoHS compliant?

    • Yes, MXPLAD15KP51AE3 is RoHS compliant, ensuring that it meets environmental standards for hazardous substances.

  7. Can MXPLAD15KP51AE3 be used for surge protection in outdoor applications?

    • Yes, MXPLAD15KP51AE3 is suitable for outdoor applications due to its robust construction and ability to withstand harsh environmental conditions.

  8. What are the recommended mounting and soldering techniques for MXPLAD15KP51AE3?

    • MXPLAD15KP51AE3 is typically mounted using through-hole technology and follows standard soldering practices outlined in the datasheet.

  9. Does MXPLAD15KP51AE3 require any additional heat sinking or thermal management?

    • MXPLAD15KP51AE3 may require additional heat sinking or thermal management in high-power applications to ensure optimal performance and reliability.

  10. Are there any application notes or design guidelines available for using MXPLAD15KP51AE3 in technical solutions?

    • Yes, detailed application notes and design guidelines are provided in the datasheet to assist engineers in implementing MXPLAD15KP51AE3 effectively in their technical solutions.