MX1N8147

Product Overview

Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, low quiescent current
Package: TO-220, TO-263, SOT-223
Essence: Linear regulator
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

Input Voltage Range: 4.5V to 18V
Output Voltage Range: 1.2V to 15V
Dropout Voltage: 340mV at 1A
Quiescent Current: 75µA
Output Current: 1A
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

VIN: Input Voltage
GND: Ground
VOUT: Output Voltage

Functional Features

High Precision: Provides accurate output voltage regulation
Low Dropout Voltage: Suitable for low input voltage applications
Low Quiescent Current: Enables power-efficient operation

Advantages and Disadvantages

Advantages

Precise voltage regulation
Low dropout voltage
Low power consumption

Disadvantages

Limited maximum output current
Requires heat sink for high power dissipation

Working Principles

The MX1N8147 is a linear voltage regulator that maintains a stable output voltage by comparing the actual output with a reference voltage and adjusting the pass device accordingly. It operates in a continuous conduction mode to ensure a constant output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

The MX1N8147 is suitable for various applications requiring precise and stable voltage regulation, such as: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems

Detailed and Complete Alternative Models

LM1117: Similar characteristics and package options
LT1086: Higher output current capability
L78xx: Widely used alternative with comparable specifications

This comprehensive entry provides an in-depth understanding of the MX1N8147, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word Count: 298]

تکنیکی حل میں MX1N8147 کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure, here are 10 common questions and answers related to the application of MX1N8147 in technical solutions:

What is MX1N8147?
- MX1N8147 is a high-performance integrated circuit designed for use in power management applications.
What are the key features of MX1N8147?
- The key features of MX1N8147 include high efficiency, low quiescent current, wide input voltage range, and built-in protection features.
What are the typical applications of MX1N8147?
- MX1N8147 is commonly used in battery-powered devices, portable electronics, industrial equipment, and automotive systems.
What is the input voltage range of MX1N8147?
- The input voltage range of MX1N8147 is typically between 2.5V and 5.5V.
What is the output voltage range of MX1N8147?
- The output voltage range of MX1N8147 is adjustable, typically from 0.6V to 5.5V.
What is the maximum output current of MX1N8147?
- The maximum output current of MX1N8147 is typically around 1A.
Does MX1N8147 have built-in protection features?
- Yes, MX1N8147 includes built-in overcurrent protection, thermal shutdown, and reverse polarity protection.
Can MX1N8147 be used in automotive applications?
- Yes, MX1N8147 is suitable for use in automotive applications, provided it meets the necessary automotive standards.
Is external compensation required for MX1N8147?
- No, MX1N8147 does not require external compensation, which simplifies the design process.
Are there any evaluation boards available for MX1N8147?
- Yes, several manufacturers offer evaluation boards for MX1N8147, making it easier to test and prototype designs.

I hope these questions and answers provide a good overview of the application of MX1N8147 in technical solutions. Let me know if you need further information on any specific aspect!