Microsemi Corporation
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
MPLAD6.5KP10AE3
تفصیل دیکھیں ڈیٹا شیٹ

MPLAD6.5KP10AE3

Product Overview

Category

The MPLAD6.5KP10AE3 belongs to the category of high-power transient voltage suppressor (TVS) diodes.

Use

These diodes are used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

  • High power handling capability
  • Fast response time
  • Low clamping voltage
  • Robust packaging for enhanced durability

Package

The MPLAD6.5KP10AE3 is typically available in a DO-201AD package.

Essence

The essence of the MPLAD6.5KP10AE3 lies in its ability to provide reliable overvoltage protection for electronic circuits and devices.

Packaging/Quantity

These diodes are commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Peak Power Dissipation: 6500W
  • Standoff Voltage Range: 6.5V to 10V
  • Breakdown Voltage: 7.22V to 9.5V
  • Maximum Clamping Voltage: 11.2V at 100A
  • Operating Temperature Range: -55°C to 175°C
  • RoHS Compliant: Yes

Detailed Pin Configuration

The MPLAD6.5KP10AE3 typically features a two-pin configuration, with the anode and cathode terminals clearly marked for easy installation and connection.

Functional Features

  • Transient voltage suppression
  • Reverse polarity protection
  • High surge current capability
  • Low leakage current

Advantages and Disadvantages

Advantages

  • High power dissipation capability
  • Fast response to transient events
  • Wide operating temperature range
  • RoHS compliance for environmental friendliness

Disadvantages

  • Relatively large physical size compared to lower power TVS diodes
  • Higher cost compared to standard diodes

Working Principles

The MPLAD6.5KP10AE3 operates by diverting excessive transient currents away from sensitive electronic components, thereby limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MPLAD6.5KP10AE3 is commonly used in the following applications: - Power supply units - Communication equipment - Industrial control systems - Automotive electronics - Solar inverters

Detailed and Complete Alternative Models

Some alternative models to the MPLAD6.5KP10AE3 include: - SMAJ6.5A - P6KE10A - 1.5KE6.5CA - SA6.5A

In conclusion, the MPLAD6.5KP10AE3 is a high-power transient voltage suppressor diode that offers robust protection against voltage transients in various electronic applications.

[Word count: 398]

تکنیکی حل میں MPLAD6.5KP10AE3 کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is MPLAD6.5KP10AE3?

    • MPLAD6.5KP10AE3 is a type of transient voltage suppressor diode designed to protect electronic circuits from overvoltage transients.

  2. What are the key features of MPLAD6.5KP10AE3?

    • The key features include a high surge capability, low clamping voltage, and fast response time.

  3. Where can MPLAD6.5KP10AE3 be used in technical solutions?

    • MPLAD6.5KP10AE3 can be used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems.

  4. How does MPLAD6.5KP10AE3 protect electronic circuits?

    • MPLAD6.5KP10AE3 diverts excessive current away from sensitive components when an overvoltage event occurs, thus protecting the circuit.

  5. What is the maximum voltage rating of MPLAD6.5KP10AE3?

    • MPLAD6.5KP10AE3 has a maximum voltage rating of 10 kilovolts (kV).

  6. Can MPLAD6.5KP10AE3 be used for ESD protection?

    • Yes, MPLAD6.5KP10AE3 can be used for electrostatic discharge (ESD) protection in electronic devices.

  7. Are there any specific thermal considerations when using MPLAD6.5KP10AE3?

    • It is important to consider the thermal management of MPLAD6.5KP10AE3 to ensure it operates within its specified temperature range for optimal performance.

  8. What is the typical application circuit for MPLAD6.5KP10AE3?

    • A typical application circuit includes connecting the diode between the protected line and ground to shunt excess voltage.

  9. Does MPLAD6.5KP10AE3 require any external components for proper operation?

    • In most cases, MPLAD6.5KP10AE3 does not require additional external components for basic protection functionality.

  10. Is MPLAD6.5KP10AE3 RoHS compliant?

    • Yes, MPLAD6.5KP10AE3 is typically RoHS compliant, making it suitable for use in environmentally conscious applications.