Microchip Technology
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
PIC18LF56K42-I/MV
تفصیل دیکھیں ڈیٹا شیٹ

PIC18LF56K42-I/MV

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Low power consumption, high performance, versatile
  • Package: 28-pin QFN
  • Essence: A microcontroller designed for various applications requiring low power and high performance.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 64 MHz
  • Program Memory Size: 56 KB
  • RAM Size: 4 KB
  • Data EEPROM Size: 256 bytes
  • Number of I/O Pins: 25
  • ADC Channels: 10-bit, 35 channels
  • Communication Interfaces: UART, SPI, I2C, USB
  • Operating Voltage Range: 1.8V - 5.5V
  • Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC18LF56K42-I/MV microcontroller has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. RC0 - General-purpose I/O pin
  10. RC1 - General-purpose I/O pin
  11. RC2 - General-purpose I/O pin
  12. RC3 - General-purpose I/O pin
  13. RC4 - General-purpose I/O pin
  14. RC5 - General-purpose I/O pin
  15. RC6 - General-purpose I/O pin
  16. RC7 - General-purpose I/O pin
  17. OSC1/CLKIN - Oscillator input
  18. OSC2/CLKOUT - Oscillator output
  19. RB0 - General-purpose I/O pin
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. VUSB - USB power supply
  28. VDDCORE - Core voltage supply

Functional Features

  • Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
  • C Compiler Optimized Architecture
  • Direct, Indirect and Relative Addressing Modes
  • Hardware Multiply (8x8) for Efficient Calculation
  • Power-on Reset (POR), Brown-out Reset (BOR)
  • Low-Power Sleep mode
  • Timer modules for various applications
  • Analog-to-Digital Converter (ADC) for precise measurements
  • Serial communication interfaces for data transfer
  • PWM module for controlling motors and other devices

Advantages and Disadvantages

Advantages: - Low power consumption enables longer battery life in portable devices. - High-performance architecture allows for efficient execution of tasks. - Versatile I/O pins provide flexibility in connecting external components. - Wide operating voltage range accommodates different power supply configurations.

Disadvantages: - Limited program memory size may restrict the complexity of applications. - Limited RAM size may pose challenges for memory-intensive operations. - Lack of built-in Ethernet or Wi-Fi connectivity may require additional components for networking capabilities.

Working Principles

The PIC18LF56K42-I/MV microcontroller operates based on the Harvard architecture, where separate program and data memories are used. It executes instructions fetched from the program memory and performs operations on data stored in the data memory. The microcontroller's core handles various tasks, such as arithmetic calculations, control flow, and I/O operations.

Detailed Application Field Plans

The PIC18LF56K42-I/MV microcontroller finds applications in a wide range of fields, including: 1. Industrial automation: Control systems, monitoring devices, and data acquisition. 2. Home automation: Smart lighting, security systems, and energy management. 3. Automotive electronics: Engine control units, dashboard displays, and infotainment systems. 4. Medical devices: Patient monitoring, diagnostic equipment, and drug delivery systems. 5. Consumer electronics: Remote controls, wearable devices, and home appliances. 6. Internet of Things (IoT): Connected sensors, smart devices, and data collection.

Detailed and Complete Alternative Models

  • PIC18F46K42-I/MV
  • PIC18F66K42-I/MV
  • PIC18F86K42-I/MV
  • PIC18F47K42-I/MV
  • PIC18F67K42

تکنیکی حل میں PIC18LF56K42-I/MV کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is the operating voltage range of PIC18LF56K42-I/MV?
    - The operating voltage range of PIC18LF56K42-I/MV is 1.8V to 5.5V.

  2. Can PIC18LF56K42-I/MV be used in battery-powered applications?
    - Yes, PIC18LF56K42-I/MV's low operating voltage makes it suitable for battery-powered applications.

  3. What are the key features of PIC18LF56K42-I/MV?
    - Some key features include a wide operating voltage range, low power consumption, and multiple communication interfaces.

  4. Is PIC18LF56K42-I/MV suitable for industrial control applications?
    - Yes, PIC18LF56K42-I/MV's robust design and communication capabilities make it suitable for industrial control applications.

  5. Does PIC18LF56K42-I/MV support analog-to-digital conversion?
    - Yes, PIC18LF56K42-I/MV has built-in analog-to-digital converters for sensor interfacing.

  6. Can PIC18LF56K42-I/MV be programmed using C language?
    - Yes, PIC18LF56K42-I/MV can be programmed using C language with the appropriate development tools.

  7. What is the maximum clock frequency supported by PIC18LF56K42-I/MV?
    - PIC18LF56K42-I/MV supports a maximum clock frequency of 64 MHz.

  8. Are there any integrated peripherals in PIC18LF56K42-I/MV?
    - Yes, PIC18LF56K42-I/MV includes integrated peripherals such as timers, PWM modules, and communication interfaces.

  9. Can PIC18LF56K42-I/MV operate in harsh environmental conditions?
    - Yes, PIC18LF56K42-I/MV is designed to operate in extended temperature ranges and harsh environments.

  10. Is there a development kit available for PIC18LF56K42-I/MV?
    - Yes, Microchip provides a development kit that includes everything needed to start developing with PIC18LF56K42-I/MV.