PIC18LF26J50T-I/SS

Product Overview

Category

The PIC18LF26J50T-I/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

• Low power consumption
• High performance
• Enhanced connectivity options
• Rich peripheral integration
• Ample memory capacity

Package

The PIC18LF26J50T-I/SS is available in a SSOP (Shrink Small Outline Package) package.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC18LF26J50T-I/SS is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Architecture: 8-bit
• CPU Speed: Up to 48 MHz
• Program Memory Size: 32 KB
• RAM Size: 2 KB
• Data EEPROM Size: 256 bytes
• Number of I/O Pins: 25
• ADC Channels: 12
• UART Modules: 1
• SPI Modules: 1
• I2C Modules: 1
• Operating Voltage Range: 2.0V to 3.6V
• Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18LF26J50T-I/SS has a total of 25 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. RB0 - General-purpose I/O pin
10. RB1 - General-purpose I/O pin
11. RB2 - General-purpose I/O pin
12. RB3 - General-purpose I/O pin
13. RB4 - General-purpose I/O pin
14. RB5 - General-purpose I/O pin
15. RB6 - General-purpose I/O pin
16. RB7 - General-purpose I/O pin
17. RC0 - General-purpose I/O pin
18. RC1 - General-purpose I/O pin
19. RC2 - General-purpose I/O pin
20. RC3 - General-purpose I/O pin
21. RC4 - General-purpose I/O pin
22. RC5 - General-purpose I/O pin
23. RC6 - General-purpose I/O pin
24. RC7 - General-purpose I/O pin
25. VUSB - USB power supply

Functional Features

The PIC18LF26J50T-I/SS microcontroller offers the following functional features:

• Enhanced connectivity options including USB, UART, SPI, and I2C interfaces.
• Rich peripheral integration such as ADC for analog signal acquisition, timers for precise timing control, and PWM for generating analog-like signals.
• Low power consumption modes to optimize energy efficiency.
• Ample program memory and RAM capacity for storing and processing data.

Advantages and Disadvantages

Advantages

• High performance and processing capabilities.
• Efficient power management for extended battery life.
• Versatile connectivity options for seamless integration with other devices.
• Ample memory capacity for storing and processing data.

Disadvantages

• Limited number of I/O pins compared to some other microcontrollers.
• Relatively higher cost compared to lower-end microcontrollers.

Working Principles

The PIC18LF26J50T-I/SS microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in its program memory to perform various tasks, such as data processing, control operations, and communication with external devices. The microcontroller's internal architecture and peripheral modules enable it to carry out these tasks efficiently and reliably.

Detailed Application Field Plans

The PIC18LF26J50T-I/SS microcontroller finds applications in various fields, including but not limited to:

1. Home automation systems
2. Industrial control systems
3. Medical devices
4. Automotive electronics
5. Internet of Things (IoT) devices
6. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionalities to the PIC18LF26J50T-I/SS microcontroller include:

1. PIC18F26J50-I/SS
2. PIC18LF25K50-I/SS
3. PIC18F27J53-I/SS
4. PIC18LF24J50-I/SS
5. PIC18F26K