Microchip Technology
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
PIC16F722-I/MV
تفصیل دیکھیں ڈیٹا شیٹ

PIC16F722-I/MV

Product Overview

Category

The PIC16F722-I/MV belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 8-bit RISC architecture
  • Flash program memory with self-read/write capability
  • Enhanced mid-range core with 49 instructions
  • Wide operating voltage range: 1.8V to 5.5V
  • Low power consumption
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) module
  • Timers and PWM modules for precise timing control
  • Various interrupt sources for event-driven programming

Package

The PIC16F722-I/MV is available in a small form factor package, typically a 28-pin QFN (Quad Flat No-Lead) package.

Essence

The essence of the PIC16F722-I/MV lies in its ability to provide a cost-effective and versatile solution for embedded control applications.

Packaging/Quantity

This microcontroller is usually supplied in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • CPU Speed: Up to 32 MHz
  • Program Memory Size: 7 KB
  • RAM Size: 1 KB
  • Number of I/O Pins: 25
  • Operating Temperature Range: -40°C to +125°C
  • Supply Voltage Range: 1.8V to 5.5V
  • Data EEPROM Size: 256 bytes
  • ADC Resolution: 10-bit
  • Number of Timers: 3
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC16F722-I/MV has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. RA0 - Analog Input/Output
  2. RA1 - Analog Input/Output
  3. RA2 - Analog Input/Output
  4. RA3 - Analog Input/Output
  5. RA4 - Digital Input/Output
  6. RA5 - Digital Input/Output
  7. VSS - Ground
  8. MCLR/VPP - Master Clear/Input for Programming
  9. RB0 - Digital Input/Output
  10. RB1 - Digital Input/Output
  11. RB2 - Digital Input/Output
  12. RB3 - Digital Input/Output
  13. RB4 - Digital Input/Output
  14. RB5 - Digital Input/Output
  15. RB6 - Digital Input/Output
  16. RB7 - Digital Input/Output
  17. VDD - Power Supply
  18. OSC1/CLKIN - Oscillator Input
  19. OSC2/CLKOUT - Oscillator Output
  20. RC0 - Digital Input/Output
  21. RC1 - Digital Input/Output
  22. RC2 - Digital Input/Output
  23. RC3 - Digital Input/Output
  24. RC4 - Digital Input/Output
  25. RC5 - Digital Input/Output
  26. RC6 - Digital Input/Output
  27. RC7 - Digital Input/Output
  28. VSS - Ground

Functional Features

The PIC16F722-I/MV offers several functional features that enhance its usability and performance:

  1. Flash Program Memory: Allows for easy reprogramming of the microcontroller.
  2. Enhanced Mid-Range Core: Provides a wide range of instructions for efficient programming.
  3. Communication Interfaces: UART, SPI, and I2C interfaces enable seamless communication with other devices.
  4. Analog-to-Digital Converter (ADC): Enables precise measurement and conversion of analog signals.
  5. Timers and PWM Modules: Facilitate accurate timing control and generation of PWM signals.
  6. Interrupt Sources: Multiple interrupt sources allow for event-driven programming and efficient handling of external events.

Advantages and Disadvantages

Advantages

  • High-performance architecture for efficient processing.
  • Wide operating voltage range allows for flexibility in power supply selection.
  • Low power consumption for energy-efficient designs.
  • Compact package size enables integration into space-constrained applications.
  • Versatile communication interfaces facilitate connectivity with other devices.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Relatively low number of I/O pins may limit the number of peripherals that can be connected directly.

Working Principles

The PIC16F722-I/MV operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with various peripherals through its I/O pins, and responds to external events through interrupts. The core functionality is driven by the central processing unit (CPU), which performs arithmetic, logical, and control operations.

Detailed Application Field Plans

The PIC16F722-I/MV finds applications in various

تکنیکی حل میں PIC16F722-I/MV کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

  1. What is the maximum operating frequency of PIC16F722-I/MV?
    - The maximum operating frequency of PIC16F722-I/MV is 32 MHz.

  2. Can PIC16F722-I/MV be used for motor control applications?
    - Yes, PIC16F722-I/MV can be used for motor control applications with its integrated PWM modules.

  3. Does PIC16F722-I/MV support analog-to-digital conversion?
    - Yes, PIC16F722-I/MV has a 10-bit ADC module for analog-to-digital conversion.

  4. What are the communication interfaces supported by PIC16F722-I/MV?
    - PIC16F722-I/MV supports SPI, I2C, and USART communication interfaces.

  5. Is PIC16F722-I/MV suitable for battery-powered applications?
    - Yes, PIC16F722-I/MV has low power consumption features, making it suitable for battery-powered applications.

  6. Can PIC16F722-I/MV be programmed using C language?
    - Yes, PIC16F722-I/MV can be programmed using C language with the MPLAB XC8 compiler.

  7. What are the available memory options in PIC16F722-I/MV?
    - PIC16F722-I/MV has 3.5 KB of Flash program memory and 128 bytes of data EEPROM.

  8. Does PIC16F722-I/MV have built-in timers?
    - Yes, PIC16F722-I/MV has multiple built-in timer modules for various timing applications.

  9. Can PIC16F722-I/MV be used in temperature sensing applications?
    - Yes, PIC16F722-I/MV can be used in temperature sensing applications with its analog input and ADC capabilities.

  10. Is PIC16F722-I/MV RoHS compliant?
    - Yes, PIC16F722-I/MV is RoHS compliant, making it suitable for environmentally friendly designs.