Intersil
تصویر کی نمائندگی ہو سکتی ہے۔
پروڈکٹ کی تفصیلات کے لیے وضاحتیں دیکھیں۔
ISL6334DCRZ
تفصیل دیکھیں ڈیٹا شیٹ

ISL6334DCRZ

Product Overview

Category

ISL6334DCRZ belongs to the category of voltage regulators.

Use

It is commonly used in electronic devices to regulate and control voltage levels.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL6334DCRZ comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6334DCRZ lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

ISL6334DCRZ is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 4A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 120µA

Detailed Pin Configuration

ISL6334DCRZ has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin
  4. COMP: Compensation pin
  5. SS: Soft-start pin
  6. EN: Enable pin
  7. VCC: Supply voltage
  8. PGND: Power ground
  9. BOOT: Bootstrap capacitor connection
  10. LX: Switching node
  11. AGND: Analog ground
  12. OCSET: Overcurrent protection threshold setting
  13. PGOOD: Power good indicator
  14. RT: External resistor for setting switching frequency
  15. SS/TR: Soft-start and tracking pin
  16. VSENSE: Current sense input

Functional Features

  • Voltage regulation: ISL6334DCRZ ensures a stable output voltage within the specified range.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.
  • Thermal shutdown protection: The device is equipped with thermal shutdown protection, preventing damage due to overheating.
  • Soft-start: The soft-start feature allows for a gradual increase in output voltage during startup, reducing stress on components.

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power consumption.
  • Wide input voltage range makes it suitable for various applications.
  • Compact size enables easy integration into electronic devices.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Requires external components for proper operation.

Working Principles

ISL6334DCRZ operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal switch. The feedback loop continuously monitors the output voltage and adjusts the duty cycle accordingly to maintain the desired voltage level.

Detailed Application Field Plans

ISL6334DCRZ finds application in various fields, including: 1. Consumer electronics: Used in smartphones, tablets, and portable devices. 2. Computer hardware: Employed in motherboards, graphics cards, and power supplies. 3. Industrial equipment: Integrated into control systems, motor drives, and power converters. 4. Automotive electronics: Utilized in automotive power management systems and infotainment systems.

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: A popular alternative with similar specifications and features.
  2. TPS5430: Offers higher maximum output current and wider input voltage range.
  3. LT1763: Provides lower quiescent current and higher efficiency.

These alternative models can be considered based on specific requirements and application scenarios.

Word count: 533 words

تکنیکی حل میں ISL6334DCRZ کے اطلاق سے متعلق 10 عام سوالات اور جوابات کی فہرست بنائیں

Sure! Here are 10 common questions and answers related to the application of ISL6334DCRZ in technical solutions:

  1. Q: What is ISL6334DCRZ? A: ISL6334DCRZ is a highly integrated synchronous buck controller designed for high-performance power applications.

  2. Q: What is the input voltage range supported by ISL6334DCRZ? A: ISL6334DCRZ supports an input voltage range from 4.5V to 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6334DCRZ? A: The output voltage range achievable with ISL6334DCRZ depends on the external components used, but it typically ranges from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL6334DCRZ can handle? A: ISL6334DCRZ can handle a maximum output current of up to 30A.

  5. Q: Can ISL6334DCRZ support multiple phases for higher power applications? A: Yes, ISL6334DCRZ can be configured to support multiple phases for higher power applications, allowing for better efficiency and load sharing.

  6. Q: Does ISL6334DCRZ have any built-in protection features? A: Yes, ISL6334DCRZ includes various protection features such as overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Is ISL6334DCRZ compatible with both analog and digital control interfaces? A: Yes, ISL6334DCRZ supports both analog and digital control interfaces, providing flexibility in system design.

  8. Q: Can ISL6334DCRZ operate in a wide temperature range? A: Yes, ISL6334DCRZ is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  9. Q: What type of package does ISL6334DCRZ come in? A: ISL6334DCRZ is available in a compact 32-lead QFN package.

  10. Q: Are there any evaluation boards or reference designs available for ISL6334DCRZ? A: Yes, Intersil provides evaluation boards and reference designs for ISL6334DCRZ, which can help in the development and testing of power solutions.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.